Contact

Summary of this article

NATO packaging requirements make packaging an integral part of the operational readiness of defence equipment. Packaging must not only provide protection during transport, but also withstand storage, handling, climatic exposure, and changing logistical conditions. The key challenge is that there is no single universal NATO standard that is sufficient for every application. The applicable requirements depend on the equipment, mode of transport, storage duration, and operational use.

For procurement, engineering, and supply chain teams, this means that compliance requirements must be translated into concrete technical specifications from the specification phase onward. STANAG agreements, military standards, and additional contractual requirements determine, among other things, the required performance in terms of shock, vibration, moisture, temperature, corrosion, and handling. The packaging must then be designed and validated for that specific application. Testing based on assumptions or simply adopting an existing solution increases the risk of overengineering, additional testing, delays, and rejection.

The greatest value is achieved when defence packaging is treated as an engineering challenge and incorporated as early as the procurement phase. By bringing together the use profile, relevant standards, product risks, packaging design, and test strategy in advance, a demonstrably suitable solution can be developed. The assessment should not focus solely on purchase price, but also on reuse, maintenance, service life, documentation, and operational reliability. In this way, NATO-compliant packaging shifts from being a compliance obligation to a management tool that enables defence suppliers to systematically control technical risks, lifecycle costs, and security of supply.
Show full summary »

Military equipment requires more than just a rugged case or transport crate. From our experience, we know that the packaging must match the equipment, the logistics chain, the operational environment, and the requirements defined in the contract or specification. This is precisely where we regularly see an issue in defence procurement: a packaging solution is required to be ‘NATO-compliant’ or ‘MIL-STD compliant’, while it has not yet been determined what performance the packaging actually needs to demonstrate.

Damage to military equipment during transport is simply not an option. Especially when it concerns drones, communication systems, or other mission-critical equipment on which lives may depend.

At Faes, we therefore approach defence packaging as an engineered system. We do not start with a standard case, but with the question of what the product needs to withstand during transport, storage, handling, and deployment. Only then do we determine the construction, materials, interior, sealing, and test method.

Medewerkers van Faes lopen door de werkplaats tussen verpakkingsonderdelen en transportmiddelen, passend bij het plannen van logistieke verpakkingskosten en TCO.

NATO compliance starts with the right specification

There is no single universal ‘NATO packaging requirement’ that applies in the same way to every defence product. A STANAG establishes agreements between NATO member states on the implementation of standards. The requirements that ultimately apply to your packaging depend on the application, the contract, the logistics route, and any additional national or customer-specific requirements.

For packaging, for example, STANAG 4280/APP-21 for packaging and preservation and STANAG 2828/APP-22 for military pallets, packages, and containers may be relevant. Depending on the specific application, standards relating to test procedures or ESD protection may also play a role. Contracts linked to US defence requirements may additionally refer to MIL-STD-2073-1 for military packaging or MIL-STD-129 for marking during storage and shipment. MIL-STD-810 describes environmental and laboratory test methods; it is therefore not a generic certification mark that can simply be applied to any case.

Dangerous goods are also subject to separate transport regulations and UN requirements. That is why we do not treat standards as isolated boxes to tick. We translate them into concrete design and acceptance criteria for the complete packaging system.

From standard to technical packaging specification

A standard does not automatically determine what your packaging should look like. That is why we first identify which loads and conditions are actually relevant. This includes the weight and centre of gravity of the equipment, the maximum allowable shock load, vibration profiles, temperature and humidity, dust and water exposure, stacking, lifting, transport by road, air, or sea, and the way operators use the packaging in the field.

This is where we see the added value of custom industrial packaging. A sensitive electronic module, for example, requires more than just a strong outer enclosure. We tailor the cushioning to the mass, fragility, and expected shock and vibration loads. Foam that is too rigid may not sufficiently isolate forces, while a solution that is too soft may allow excessive movement. Mounting points, lid loads, cable feed-throughs, ventilation, ESD protection, and climate control can also form part of the design.

For a procurement professional, this means that the specification should not only state which standard is required, but above all which performance must be demonstrated and under which conditions. Within our engineering process, we translate these technical and operational requirements into the appropriate construction and material choices.

Testing for the application, not based on assumptions

Defence projects often require a test report or certificate. That is why we include validation early in the design process. Together, we determine which tests are necessary and define the configuration, load, test sequence, and acceptance criteria in a test plan. This makes it clear in advance when a packaging solution does or does not meet the requirements.

In doing so, we avoid situations in which packaging may look structurally impressive but has never actually demonstrated that the equipment will continue to function correctly after being exposed to the relevant loads. Proper validation therefore goes beyond assessing the exterior alone. For us, it is about the performance of the product, the interior, and the packaging as one complete system.

Our experience with defence equipment translates into better engineering

We have been working on packaging challenges for the defence sector for many years. For the TITAAN project, we supply enclosures for tactical communication equipment. The current half-19-inch solutions combine, among other things, an aluminium enclosure, an internal rack mounted on shock absorbers, and IP67 sealing during transport. For us, this project clearly demonstrates how packaging needs to evolve as equipment becomes smaller, lighter, or technically different.

For F-16 technicians of the Royal Netherlands Air Force, we also developed a custom maintenance case that combines protection with practical field use. The interior makes missing components immediately visible, is easy to clean, and supports a fixed and organised working method. For an F-16 vertical tail, we developed a much larger custom packaging solution for safe transport from Volkel Air Base. Different applications, but always the same approach: first we understand the operational requirements, then we design the packaging.

Look beyond purchase price and compliance

Defence packaging is often used for many years and over multiple cycles. That is why, during the engineering process, we also consider handling, repairability, replaceable interior components, stackability, and possible modifications when the product changes. A slightly higher investment in a well-designed reusable packaging solution can reduce damage, repacking, downtime, and unnecessary replacement over its lifetime.

For us, sustainability is therefore not achieved by reducing protection, but by designing packaging that remains usable for longer, can be maintained, and can be adapted wherever possible.

Involve us as early as the procurement phase

We achieve the best results when packaging engineering does not begin only after the product and contract have already been fully defined. By involving us early in the specification process, we can translate standards, operational conditions, product vulnerability, and logistics requirements into a single technically feasible packaging specification.

Would you like to know whether your current specification provides sufficient guidance for a safe and demonstrably suitable defence packaging solution? We would be happy to assess together which requirements are relevant, where technical risks may exist, and what level of validation is needed. This way, you are not simply purchasing a crate or case; together, we develop a custom packaging system designed for the task it needs to perform in practice.

Print
Email Download PDF
Robert Verboven

Robert Verboven

Sales Manager

Robert Verboven is Sales Manager at Faes and advises customers on smart packaging solutions within the industry. He translates complex packaging needs into practical solutions that contribute to a more efficient supply chain.

More articles by Robert Verboven

Good packaging doesn’t happen by chance. Using a proven process, our specialists guide you step by step from the initial idea to the final product.

Contact
1
Intake
During an initial consultation, our packaging experts will assess your specific needs. By discussing the requirements the packaging must meet, they can work with our engineers to develop a concept.
2
Concept
Is standard packaging an option, or is custom packaging preferred? This decision is made in consultation with the consultants and designers.
3
Ontwerp
Based on the concept, you’ll receive a tailored proposal. Thanks to our short lines of communication, we can easily make adjustments whenever necessary. Are you satisfied with the recommendation? Then we’ll move forward with developing a prototype.
4
Prototype
Throughout the process, we present concepts digitally and, where necessary, submit 2D drawings for review. You and your project team members can provide feedback or approve them, ensuring that decisions are clearly documented and the review process runs efficiently.
5
Production
Once approval is granted, our experts get to work on producing the packaging. From closures to a fully custom-designed interior: we ensure that all your requirements are carefully incorporated into the final solution.
6
Service
We remain involved even after delivery. We’re happy to take care of all your packaging needs, so you can count on our support for maintenance, modifications, or more complex issues.