Contact

Summary of this article

For specialised drones, a standard transport case is not sufficient. The customer required a compact solution in which several valuable drones, accessories and spare parts could be stored safely and as a complete set. At the same time, the case had to fit easily on the rear seat of a passenger car, provide protection against drops and impacts, and remain suitable for use at high temperatures.

The solution was developed in close collaboration with the customer and the drone manufacturer. Based on product specifications, STEP files and sketches of the preferred layout, an interior was designed to make maximum use of the available space. The lid was also used functionally to store components. Because the case is used worldwide, the lid interior was mechanically secured. This prevents adhesive bonds from failing at high temperatures and components from falling onto the drones.

For engineering, operations and procurement, this application demonstrates that effective custom packaging is created by translating operational requirements into concrete design criteria at an early stage. Digital models, fit checks, prototypes and joint reviews made it possible to validate protection, capacity, transportability and heat resistance before production. In this way, the packaging becomes an integral part of the drone system, ensuring that all components remain safe, complete and immediately ready for use.
Show full summary »

Faes is active in several very different industries. Sometimes we work for a company in the medical sector, other times for a machine builder. But what our customers all have in common is that they want to transport or present their products in a high-quality manner.

In this article I'll tell you more about a packaging solution we developed for a client with a very specific request and a special application, namely; drones.

Een stevige beschermende koffer met speciaal ontworpen opbergruimte voor het veilig transporteren van een drone en toebehoren

A smart packaging solution for a specific application

Safely packaged and always right at hand

Our client was increasingly asked by its customers whether compact drone cases could be supplied with its drones. On the one hand to properly protect the vulnerable drones from falls and impacts, and on the other hand to be able to neatly store the drones complete with accessories. Another important aspect was that the drone crate had to be easily transportable in the back seat of a passenger car and that it would be heat-resistant. We set to work!

A co-creation

Nice to see that this drone manufacturer was very involved in the packaging project. The client itself immediately tackled it very seriously and professionally, making our collaboration a real co-creation. For example, they chose in advance which products and components should be packed in the case and made their own sketch of how they saw the end result, using STEP files (digital drawings) that we shared with them. The sketch was eventually converted into a design to be produced.

Making good use of the box lid

Compactness was an important feature for the customer, so the lid was also put to good use. This was quite a challenge, because of course the parts were not allowed to fall out when the lid was closed and they were hanging upside down. We succeeded, with the result that all the space in the case is used very efficiently.

Resistant to high temperatures

What’s that for, you might think? Well, the drones our client sells are used all over the world; including in hot areas. Temperature is an important factor because heat causes the bonding of the lid interior to loosen, which can cause problems. The creative solution of our engineers? Fixing the lid interior mechanically, without being visible from the outside.

Prototypes, Reviews and Approval

At an early stage, renders (digital 3D models) can give a good impression of what the case will look like. This was also the case here, and after the design was approved, the prototype process began. During a fit test, we checked together whether all the products fitted. After the prototype process, a few minor areas for improvement came to light, which is very common. Once these had been resolved, we made one final prototype. The customer was able to review this design in our online proofing environment and then give approval, after which production was started.

Also need a (very) specific packaging solution?

My fellow packaging experts and I love a challenge, so are you looking for a smart packaging solution for a specific or even complex application? We are happy to tackle it with both hands.

Leave your question in the form below or contact us directly.

Print
Email Download PDF
Robert Verboven

Robert Verboven

Sales Manager

Robert Verboven is Sales Manager at Faes and advises customers on smart packaging solutions within the industry. He translates complex packaging needs into practical solutions that contribute to a more efficient supply chain.

More articles by Robert Verboven

Good packaging doesn’t happen by chance. Using a proven process, our specialists guide you step by step from the initial idea to the final product.

Contact
1
Intake
During an initial consultation, our packaging experts will assess your specific needs. By discussing the requirements the packaging must meet, they can work with our engineers to develop a concept.
2
Concept
Is standard packaging an option, or is custom packaging preferred? This decision is made in consultation with the consultants and designers.
3
Ontwerp
Based on the concept, you’ll receive a tailored proposal. Thanks to our short lines of communication, we can easily make adjustments whenever necessary. Are you satisfied with the recommendation? Then we’ll move forward with developing a prototype.
4
Prototype
Throughout the process, we present concepts digitally and, where necessary, submit 2D drawings for review. You and your project team members can provide feedback or approve them, ensuring that decisions are clearly documented and the review process runs efficiently.
5
Production
Once approval is granted, our experts get to work on producing the packaging. From closures to a fully custom-designed interior: we ensure that all your requirements are carefully incorporated into the final solution.
6
Service
We remain involved even after delivery. We’re happy to take care of all your packaging needs, so you can count on our support for maintenance, modifications, or more complex issues.